TVS Diodes & Varistors
Transient suppression for signal lines, power inputs and interfaces that leave the enclosure.
Protection is a system, not a component
A TVS diode absorbs a surge by conducting it, which means the rest of the circuit has to survive the clamp voltage and the current path has to be short. Most protection failures come from a good part placed badly, not from the wrong part.
We can supply unidirectional and bidirectional TVS diodes for signal and power lines, ESD arrays for multi-line interfaces, and metal-oxide varistors for AC input and higher-energy transients.
For a port that leaves the cabinet, send the interface type, the surge level it must survive and the board area available. We will quote the TVS together with the fuse or PTC and the choke, because the combination is what passes the test.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | Unidirectional / bidirectional TVS, ESD array, MOV |
| Standoff voltage | 3.3 V – 440 V |
| Peak pulse power | 100 W – 5 kW (10/1000 µs) |
| Clamping | From a few volts above standoff |
| Capacitance | From 0.3 pF (high-speed lines) |
| Typical package | SOD-323, SOD-123, SMB, SMC, 0402 array |
Where it is used
FAQ
TVS or varistor for a 24 V input?
TVS for fast transients and precise clamping; varistor for higher energy and AC lines. Industrial 24 V inputs often use both, with a fuse ahead of them.
Why does the protected IC still fail?
Usually the clamp voltage is above the IC absolute maximum, or the return path is too long. Protection only works when the current has a short, low-inductance route to ground.
Do you have low-capacitance parts for high-speed lines?
Yes, down to about 0.3 pF, which is what USB 3 and HDMI need. Standard TVS capacitance would distort the eye diagram.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.