Common-Mode Chokes & Ferrite Beads
EMI suppression for power and signal lines, from 0402 beads to through-hole common-mode chokes.
The cheapest EMC fix is usually a bead
Most EMC problems are solved with a ferrite bead and a capacitor rather than a redesign. The bead converts high-frequency noise into heat; the capacitor gives it a return path. Which bead depends on the frequency band that is failing, not on the current rating alone.
We can supply SMD ferrite beads from 0402 to 1812, high-current beads for power rails, and common-mode chokes for DC input and signal lines where differential noise is not the issue.
If a product is failing emissions, send the failing frequency band and the cable or rail involved. We will suggest a bead plus capacitor combination, and say plainly when a bead will not be enough.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | SMD ferrite bead, common-mode choke, feed-through |
| Impedance | 10 Ω – 3 kΩ at 100 MHz |
| Rated current | 50 mA – 10 A |
| DCR | From 10 mΩ |
| Typical package | 0402, 0603, 0805, 1206, 1812, through-hole toroid |
Where it is used
FAQ
Bead or common-mode choke?
A bead for differential noise on a single line; a common-mode choke when the noise appears on both conductors and returns through earth. The two solve different problems.
Why did the bead not fix the emission?
Usually because the failing band is below the bead impedance peak, or because the noise is common-mode and the bead only acts differentially. Both need a different part, not a bigger one.
Do you supply high-current beads for 5 A rails?
Yes, up to about 10 A in the larger packages, with the trade-off that impedance falls as current rating rises.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.