Crystals, Oscillators & Resonators
MHz and kHz timing devices, including TCXO and oscillator modules for communication and measurement.
Timing parts fail quietly, then everything else fails
A crystal that is marginal does not fail at incoming inspection. It starts late, drifts with temperature, or pulls outside the tolerance the MCU needs, and the symptom appears somewhere else entirely — a CAN bus that drops frames, a USB device that re-enumerates.
We can supply MHz crystals in the common 3225 and 2520 packages, 32.768 kHz parts for real-time clocks, ceramic resonators for cost-sensitive designs, and oscillator modules including TCXO where the frequency has to hold over temperature.
For a new design, the load capacitance and the drive level are the two parameters that cause the most trouble. Send the MCU or PHY part number and we will match the crystal to the oscillator circuit rather than to the frequency alone.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | MHz crystal, 32.768 kHz, ceramic resonator, oscillator, TCXO |
| Frequency | 32.768 kHz – 200 MHz |
| Tolerance | ±10 ppm to ±50 ppm (crystal), ±0.5 ppm (TCXO) |
| Load capacitance | 6 pF – 20 pF |
| Typical package | 1612, 2016, 2520, 3225, 5032, HC-49S |
Where it is used
FAQ
How do I choose the load capacitance?
Match the crystal to the oscillator circuit, not the other way round. A mismatch shifts the frequency and can stop oscillation at temperature extremes.
Crystal or oscillator module?
A crystal when the MCU has its own oscillator and cost matters; a module when you need a guaranteed start-up, a specific output format, or tight stability over temperature.
Do you supply 32.768 kHz parts with low aging?
Yes, for RTC duty. Aging is usually specified per year, and it matters more than initial tolerance in a product that runs for a decade.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.