NTC Thermistors & Inrush Limiters
Temperature sensing and inrush current limiting for power inputs and battery packs.
One part, two jobs: measure heat or absorb it
NTC thermistors do two unrelated jobs and are often confused. Sensing types change resistance predictably with temperature and are used for measurement and compensation. Power types start cold and high, then self-heat down to a low resistance, limiting inrush into a capacitor bank.
We can supply sensing NTCs in 0402 to 1206 with the common B values, probe assemblies for surface and air measurement, and power NTCs rated for 1 A to 20 A continuous with the resistance appropriate to the inrush they must limit.
For a power NTC, the design question is how much inrush the bridge and capacitors can take, and how much steady-state loss is acceptable. A part that limits inrush well also wastes power continuously, which is why relays or bypass circuits are common.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | Sensing NTC, power NTC, probe assembly |
| R25 | 1 Ω – 1 MΩ |
| B value | 3,000 – 4,700 K |
| Continuous current | 1 A – 20 A (power types) |
| Tolerance | ±1% to ±10% |
| Typical package | 0402 – 1206, radial leaded, probe |
Where it is used
FAQ
How do I size a power NTC?
From the maximum inrush the rectifier can tolerate and the steady-state current. The cold resistance sets the inrush; the hot resistance sets the continuous loss.
Sensing NTC or PT100?
NTC for cost-sensitive measurement over a limited range; PT100 where linearity and accuracy over a wide range matter more than cost.
Do you supply probe assemblies?
Yes, with cable and connector options. Confirm the probe diameter and the temperature range before ordering.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.