Aluminium Electrolytic Capacitors
Snap-in, screw-terminal and SMD electrolytics for DC-link, bulk and smoothing duty.
Bulk capacitance where the ripple current is real
On a servo drive or a switching supply, the electrolytic carries the ripple the converter produces and absorbs the energy the motor returns. Its lifetime is set by core temperature, and core temperature is set by ripple current and ESR — not by the capacitance printed on the sleeve.
We can supply radial and SMD parts for control boards, snap-in types for DC-link duty, and screw-terminal cans for larger drives. Long-life 105 °C series are the default for industrial equipment; 85 °C parts are only sensible where the ambient genuinely stays low.
For replacement or new design, send the ripple current, ambient temperature and required life. Lifetime doubles roughly every 10 °C reduction in core temperature, so the mounting position often matters more than the series.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | Radial, SMD, snap-in, screw terminal |
| Capacitance | 1 µF – 100,000 µF |
| Voltage | 6.3 V – 500 V |
| Ripple current | Up to several amps per can |
| Life | 2,000 – 12,000 h at 105 °C |
| Mounting | Through-hole, SMD, chassis clamp |
Where it is used
FAQ
How do I estimate service life?
Use the ripple current to find core temperature rise, then apply the 10 °C doubling rule from the rated life. The datasheet lifetime is a starting point, not an answer.
Can I replace a snap-in part with a smaller can?
Only if the ripple current and ESR still meet the design. A smaller can has less surface area and a shorter life at the same ripple.
Do you supply 105 °C long-life series?
Yes, and they are the default for industrial equipment. 85 °C parts are available but rarely the right choice in a sealed enclosure.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.