PCB Prototype & Small-Batch Fabrication
Gerber-to-board fabrication for prototypes and pilot builds — 2 to 8 layers, with impedance control and metal-core options.
카테고리 보기이 카탈로그의 나머지는 선반에서 집어 오지만, 이 클러스터는 제작입니다. PCB는 Gerber와 적층 구조로, 플랫 케이블과 하네스는 도면과 커넥터 목록으로, 히트싱크와 실드는 3D 모델 또는 샘플로 견적합니다. 단가는 패널 활용률, 금형·지그, 수량에 따라 달라지며 부품 가격과는 다른 논리로 움직입니다.
이 클러스터를 부품 클러스터와 분리한 이유는 약속의 성격이 다르기 때문입니다. 여기에는 지그, 샘플 승인, 제작 리드타임이 포함된 프로젝트 견적이 있고, 재고 공급 가능량은 없습니다. 파일과 계획 중인 수량 구간(시제품, 소량, 양산)을 보내주시면 공정, 보증 가능한 공차, 각 구간의 가격을 회신합니다.
Gerber-to-board fabrication for prototypes and pilot builds — 2 to 8 layers, with impedance control and metal-core options.
카테고리 보기CCL, prepreg and aluminium substrates for in-house fabrication and for boards with thermal or high-frequency demands.
카테고리 보기Flat flexible cables and flexible circuits to drawing — pitch, length, stiffener and folding radius quoted together.
카테고리 보기Harnesses built to drawing: wire gauge, connector to connector mapping, sleeving and labelling quoted as one assembly.
카테고리 보기Extruded and machined heatsinks, thermal pads and gap fillers quoted against a measured or estimated power loss.
카테고리 보기Shielding cans, brackets and small machined or sheet-metal parts quoted from a 3D model or a sample.
카테고리 보기Gerber, 드릴 데이터, 적층 구조, 표면 처리, 수량이 필요합니다. 고속 기판이라면 임피던스 공차도 알려주십시오. 자료가 불충분할 때는 이전 기판 사진이 도움이 됩니다.
가능합니다. 샘플과 소량은 양산과 별도로 견적하여 표면 처리와 결합을 먼저 승인한 뒤 지그 제작 여부를 결정할 수 있습니다.
예, 커넥터 클러스터에서 공급합니다. 조립품에 들어가는 부품과 함께 견적되므로 별도 조달이 필요하지 않습니다.