PCB Prototype & Small-Batch Fabrication

Gerber-to-board fabrication for prototypes and pilot builds — 2 to 8 layers, with impedance control and metal-core options.

Fabrication quoted from files, not from a shelf

A prototype board is quoted from what the files actually demand: layer count, minimum trace and gap, finished copper weight, surface finish, impedance requirements and the panel size your quantity can fill. Two quotes for the same Gerber can differ by a factor of two purely because one quantity fills a panel and the other leaves half of it empty.

We quote prototype and pilot quantities on the same process our production boards use, so a design approved at five pieces is not re-tooled at five hundred. Where the stack-up is still open we will propose one that keeps impedance in reach at your trace geometry instead of leaving the fab house to guess.

What we need to quote: Gerbers, drill file, stack-up (or your impedance targets), surface finish, quantity, and the tolerance class you need. For a first article we also recommend a bare-board electrical test and a cross-section on the first panel, because that is where a trace-width error shows up before assembly does.

Typical specifications

Parameter Sourcing range
Layer count 2 – 8 layers (prototype and pilot)
Base material FR-4 TG150 / TG170, aluminium and metal-core on request
Minimum trace / gap 4 / 4 mil standard, 3 / 3 mil on request
Finished copper 1 oz standard, 2 oz on request
Surface finish HASL lead-free, ENIG, OSP
Controlled impedance Quoted with stack-up; ±10 % typical
Quantity band From 5 pieces to pilot batches
Sourcing note · Fabricated per project: quoted from Gerbers with tooling and lead time stated. No stock availability applies to this category.

Where it is used

Control board prototypes before tooling
Pilot builds for field trials
Aluminium-backed LED and power boards
Re-spins of an existing design

FAQ

What is the fastest way to get a comparable quote?

Send Gerbers plus quantity and surface finish. If impedance matters, send the target and the reference layer. Quotes without those three items are not comparable between suppliers.

Can you fabricate from a photograph or an old board?

No. A board can be reverse-engineered by a design house first, but fabrication always needs Gerbers. A photograph is useful to us only as a cross-check on finish and marking.

Do you handle assembly as well?

Fabrication is quoted here; assembly is quoted separately against the BOM. Keeping the two apart makes it visible which cost belongs to the board and which to the parts.

How does quantity change the price?

Through panel utilisation and tooling. Small quantities pay for a panel that is only partly used; once the quantity fills panels the unit price drops sharply. We quote two or three quantity bands so the curve is visible.

Ready to Source Components?

Contact us today for competitive pricing and fast delivery worldwide.