FFC/FPC Ribbon Cables

Flat flexible cables and flexible circuits to drawing — pitch, length, stiffener and folding radius quoted together.

Flat cable is a mechanical part as much as an electrical one

Most flat cable failures are mechanical: a fold radius tighter than the copper tolerates, a stiffener that ends where the cable bends, or a connector that grips the contact area instead of the reinforced section. The electrical specification is usually easy; the drawing is where the part is won or lost.

We quote FFC and FPC from a drawing that states pitch, conductor count, length, contact orientation (same side or opposite), stiffener length and the minimum bend radius the installation allows. Where the drawing is not yet fixed we will propose a standard construction and mark the dimensions that cannot be changed later without new tooling.

Samples come before production for anything with a fold or a bend, because a flat cable that behaves on a bench and one that survives a moving axis are different parts even with the same drawing.

Typical specifications

Parameter Sourcing range
Pitch 0.5 / 0.8 / 1.0 / 1.25 / 2.54 mm
Conductor count 4 – 60 (drawing dependent)
Length Quoted to drawing, including stiffener
Contact orientation Same side / opposite side
Stiffener PET or FR-4, length to drawing
Shielding Available on request for EMI-sensitive runs
Sourcing note · Made to drawing: tooling, sample approval and lead time are quoted per project.

Where it is used

Board-to-board links inside compact enclosures
Display and keypad connections
Moving axes and sliding mechanisms
Sensor and camera modules

FAQ

What drawing information is essential?

Pitch, conductor count, length, contact orientation, stiffener length and the bend radius. Missing the bend radius is the usual reason a sample fails in the field rather than on the bench.

Can you match a cable to an existing connector?

Yes. Send the connector part number and we quote the cable to its mating dimensions, from the interconnect cluster, so pitch and contact orientation are verified against the actual connector.

Is there a minimum order for a custom length?

Custom lengths are tooled per drawing, so prototype quantities carry a higher unit price. We quote two quantity bands so the tooling cost is visible.

Ready to Source Components?

Contact us today for competitive pricing and fast delivery worldwide.