Terminal Blocks & Connectors
PCB terminal blocks, pluggable connectors and DIN-rail terminals for field wiring.
Where the wire meets the board
Field wiring fails at the termination far more often than in the cable. A terminal block that accepts the wrong wire gauge, or that cannot be torqued properly, will produce intermittent faults that are hard to find and easy to blame on the electronics.
We can supply PCB terminal blocks in 2.54 mm to 10 mm pitch, pluggable headers and plugs for removable wiring, and DIN-rail terminals for panel builds. Spring-cage and screw types are both available, and the choice often comes down to the installer rather than the engineer.
For a new board, send the wire gauge, the current per pole, the pitch the layout allows and whether the connector must be removable. Those four answers narrow the range to a handful of families.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Pitch | 2.54, 3.5, 3.81, 5.0, 5.08, 7.5, 10 mm |
| Wire gauge | AWG 28 – 10 |
| Current | 6 A – 40 A per pole |
| Connection | Screw, spring cage, push-in |
| Poles | 2 – 24 |
| Orientation | Horizontal, vertical, right angle |
Where it is used
FAQ
Screw or spring-cage terminals?
Screw for high current and familiar practice; spring cage where vibration or installation speed matters. Both are reliable when the wire gauge matches the clamp range.
Do you supply pluggable connectors with mating headers?
Yes, as matched pairs. Mixing brands usually works electrically but voids the mechanical tolerance, so we quote them together.
What pitch do I need for 10 A?
Usually 5.08 mm or larger. The pitch sets the creepage distance, and 3.5 mm parts are rated lower for a reason.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.