Fuses & Resettable PTCs

Cartridge, SMD and resettable fuses for board-level and input protection.

Protection that has to be chosen last, not first

A fuse is a calibrated weak point, and specifying it correctly requires knowing the normal current, the inrush, the ambient temperature and the fault current available. Choose it first and it will either nuisance-trip or fail to protect.

We can supply SMD fuses from 0.5 A to 20 A, cartridge and blade fuses for panel and input protection, and resettable PTCs where a field reset is preferable to a replacement.

For a new design, send the steady-state current, the inrush profile and the ambient. Fuse ratings are derated with temperature, so a 5 A part in a 70 °C enclosure is not a 5 A part.

Typical specifications

Parameter Sourcing range
Types SMD fuse, cartridge, blade, resettable PTC
Current 0.5 A – 20 A
Voltage 32 V – 250 V
Breaking capacity 50 A – 1,000 A
Blow characteristic Fast, time-lag
Typical package 0603, 1206, 2410, 5×20 mm, blade
Sourcing note · Availability, lead time and price are confirmed per line item when we quote — this page describes the range we can source, not stock on the shelf.

Where it is used

Board-level overcurrent protection
Input protection on industrial equipment
Battery pack protection
USB and interface port protection

FAQ

Fast or time-lag?

Time-lag where inrush is significant — motors, transformers and capacitive loads. Fast where the protected semiconductor has little surge tolerance.

Why does the fuse trip in a hot enclosure?

Fuse ratings are temperature-derated. A part rated 5 A at 25 °C may carry only 3.5 A at 70 °C, so the rating has to be chosen at the working ambient.

PTC or fuse?

PTC where a field reset is worth the higher resistance and slower response; fuse where the fault must be cleared decisively and the board is serviceable.

Ready to Source Components?

Contact us today for competitive pricing and fast delivery worldwide.