Board-to-Board & Pin Headers
Pin headers, female sockets, board-to-board connectors and fine-pitch arrays.
The connector that decides how the boards stack
Board-to-board connectors set the stack height, the mating tolerance and how many times the assembly can be opened before contact resistance drifts. On industrial equipment that is serviced in the field, the mating cycle rating matters more than the pitch.
We can supply 2.54 mm and 2.00 mm pin headers, female sockets, box headers, and fine-pitch board-to-board connectors from 0.5 mm to 1.27 mm. Shrouded and keyed versions are available where mis-mating is a risk.
For a new stack, send the board spacing, the pin count and the signal types. High-speed differential pairs need a different connector from power and ground, and mixing them in one housing usually costs more than two separate parts.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Pitch | 0.5, 0.8, 1.0, 1.27, 2.0, 2.54 mm |
| Rows | Single / dual |
| Current | 0.5 A – 3 A per contact |
| Mating cycles | 25 – 500 (part dependent) |
| Stack height | From 3 mm |
| Typical types | Pin header, female socket, box header, BTB array |
Where it is used
FAQ
How many mating cycles should I specify?
Match it to the service life: a connector opened once at commissioning needs 25 cycles; one opened during every maintenance visit needs several hundred.
Do you supply keyed and shrouded headers?
Yes, and for anything that can be plugged in backwards they are worth the small cost difference.
Can I mix power and signal in one connector?
Physically yes, but the current rating per contact usually forces a larger housing. Two connectors are often cheaper and safer.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.