Optocouplers & Photoelectric Sensors
Signal isolation, gate drive and photoelectric detection for industrial and power circuits.
Isolation is a creepage problem before it is a component
An optocoupler provides galvanic isolation, but only as much as the package creepage allows. A part rated for 5 kVrms in a narrow body cannot deliver it on a board with 3 mm between pads, and that is where most isolation failures originate.
We can supply transistor-output optocouplers for digital isolation, high-speed types for encoder and communication signals, gate-drive optocouplers for IGBT and MOSFET bridges, and photoelectric sensors for presence and position detection.
For a drive design, specify the working voltage, the pollution degree and the creepage you can achieve. Then the package follows, and the part number is the last decision rather than the first.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Types | Transistor output, high speed, gate drive, photovoltaic |
| Isolation | 2.5 – 5 kVrms |
| Speed | Up to 50 Mbps (high-speed types) |
| CTR | 50% – 600% (transistor output) |
| Creepage | From 5 mm (wide body) to 8 mm+ |
| Typical package | SOP-4, DIP-4, SO-8, wide-body SO-6 |
Where it is used
FAQ
Optocoupler or digital isolator?
Digital isolators are faster and smaller; optocouplers are more tolerant of harsh electrical environments and have a longer track record in drives. Both need the same creepage discipline.
Why does CTR matter?
It sets how much LED current you need for a given output current. Low CTR at high temperature is a common cause of marginal designs that fail in the field rather than on the bench.
Can you supply gate-drive optocouplers with desaturation detection?
Yes, for IGBT protection. They combine the drive, the fault sense and the soft turn-off in one package.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.