Current & Voltage Sensors
Hall-effect, shunt-based and isolated current sensing for motor control, BMS and power measurement.
Every control loop starts with a current measurement
Field-oriented control is only as good as the current signal feeding it. Offset drift shows up as torque ripple, bandwidth limits the loop, and a sensor that saturates on inrush will fault the drive at exactly the wrong moment.
We can supply integrated Hall current sensors for galvanically isolated measurement, shunt-based amplifiers for cost-sensitive inline sensing, and isolated voltage sensors for DC-link monitoring. Closed-loop Hall parts are available where accuracy over temperature matters.
For a new drive, send the current range, the bus voltage, the isolation requirement and the control loop bandwidth. Those four numbers narrow the choice faster than any catalogue filter.
Typical specifications
| Parameter | Sourcing range |
|---|---|
| Principle | Hall effect, shunt + amplifier, fluxgate, isolated |
| Current range | 1 A – 1,000 A |
| Bandwidth | Up to 200 kHz |
| Isolation | Up to 5 kVrms (isolated types) |
| Accuracy | ±0.5% to ±3% of full scale |
| Output | Analog voltage, current loop, digital (some types) |
Where it is used
FAQ
Hall sensor or shunt for a servo drive?
Shunt for low voltage and cost-sensitive designs where isolation is not required; Hall when the measurement must be isolated or the current is high enough that shunt loss matters.
How much bandwidth does FOC need?
Roughly ten times the current loop bandwidth, and the loop is usually a few kilohertz. A 100 kHz sensor is comfortable; 20 kHz is marginal for fast servo axes.
Do you supply closed-loop Hall sensors?
Yes, where offset drift over temperature is the limiting error. They cost more but remove the calibration step at production.
Ready to Source Components?
Contact us today for competitive pricing and fast delivery worldwide.