MOSFETs — N-Channel & P-Channel
Low-voltage and high-voltage MOSFETs for motor drives, synchronous rectification and load switching.
View categoryMOSFETs, IGBTs, rectifiers and modules — the switching stage behind every servo axis and drive.
In a drive or a motor bridge the device choice is settled by four numbers: blocking voltage with margin, on-resistance or saturation voltage at the current you really run, the thermal path from junction to heatsink, and the gate charge the driver has to move at your switching frequency. Getting three right and the fourth wrong is the usual reason a first prototype runs hot.
We quote discretes and modules against the circuit rather than against a catalogue page: send the bus voltage, continuous and peak current, switching frequency, cooling arrangement and the footprint the board allows. Where a module replaces a discrete bridge we also check creepage and the gate driver interface, because the same 600 V die can need a different driver once it moves inside a module.
Low-voltage and high-voltage MOSFETs for motor drives, synchronous rectification and load switching.
View categoryDiscrete IGBTs and modules for industrial drives, welders, induction heating and high-power inverters.
View categoryRectifiers, Schottky and fast-recovery diodes for power conversion, freewheeling and reverse protection.
View categorySmall-signal and power BJTs for drive circuits, current sources and legacy designs.
View categorySingle- and three-phase bridge rectifiers for power supplies, chargers and motor front ends.
View categoryIntegrated power modules that put the bridge, the driver and often the protection in one package.
View categoryBy switching frequency and current. Above roughly 20 kHz the switching loss of an IGBT usually dominates; below it, conduction loss and cost favour the IGBT at high current. Send the operating point and both cases can be compared.
Yes. For bridge builds we quote six devices from the same date-code lot where the supplier allows it, which matters when devices are paralleled.
Modules and discretes come from authorised distribution or documented excess inventory. Reels and trays keep their original labels, and packaging can be photographed with date codes before dispatch.
Contact us today for competitive pricing and fast delivery worldwide.